Installing As A Mass Storage Device - Creative PC-CAM 950 Slim User Manual

PC-CAM 950 Slim.book Page 5 Tuesday, August 23, 2005 12:57 PM
1. Use the Function buttons to select the PC mode
Installing as a
A PC Connect menu appears.
Mass Storage
Device
2. Use the Function buttons to
select Mass Storage mode.
3. With a USB cable, connect your
camera to an available USB
port on your computer (Figure
5-4).
4. Use the installation procedures
for your operating system.
For Windows XP only
5. The Found New Hardware
message box appears on your
Windows taskbar, telling you
that Windows has detected
your camera as a USB Mass
Storage Device.
6. After Windows finishes loading USB Mass Storage Device drivers for your
camera, close any Removable Disk, Scanner and Camera, Photo Printing
or folder view dialog boxes that appear.
If a slide show appears, press the Esc key on your keyboard to close the slide
show.
7. When a message box appears, displaying the message "Your new hardware is
installed and ready to use.", wait approximately 5 seconds.
5-5 Installing Creative PC-CAM 950 Slim
icon.
USB connector
Function
buttons
Figure 5-4: Connecting your camera to your computer