Creative PC-CAM 950 Slim User Manual page 37

PC-CAM 950 Slim.book Page 4 Tuesday, August 23, 2005 12:57 PM
For Windows Me and Windows 98 SE only
3. If you are prompted to insert the Windows 98 SE Installation CD, replace the
3. In the Insert Disk dialog box, click the OK button.
4. When the New Hardware Found message box closes, wait approximately 5
5. Press and hold the Mode button.
6. Use the Function buttons to select the PC mode
7. Use the Function buttons to select PC-CAM mode.
8. If an Unsafe Removal of Device dialog box appears, click the OK button.
9. If Windows starts copying captured images to your computer, click the Cancel
10. Click the Finish button and restart your computer if you are prompted to do so.
Creative PC-CAM 950 Slim Installation CD with the appropriate CD. If you did
not receive a Windows 98 SE installation CD with your computer but received a
Recovery Disk, the necessary Windows files may already be located at
c:\windows\options\cabs (replace c:\ with the drive letter of your hard disk
drive).
seconds.
The mode selection menu appears.
Windows loads camera and video drivers for your camera.
button.
icon.
Installing Creative PC-CAM 950 Slim 5-4