Creative PC-CAM 950 Slim User Manual page 36

PC-CAM 950 Slim.book Page 3 Tuesday, August 23, 2005 12:57 PM
For Windows XP only
3. Use the Function buttons to select PC-CAM mode.
Windows loads camera and video drivers for your camera.
4. When the Found New Hardware Wizard dialog box appears, select the
Install the software automatically (Recommended) option, and click the
Next button.
5. If a Hardware Installation dialog box appears, click the Continue Anyway
button.
6. Click the Finish button and restart your computer if you are prompted to do so.
For Windows 2000 only
3. Use the Function buttons to select PC-CAM mode.
Windows loads camera and video drivers for your camera.
4. If an Unsafe Removal of Device dialog
box appears, click the OK button.
5. When Digital Signature Not Found
dialog boxes (Figure 5-3) appear, telling
you that Creative PC-CAM 950 Slim has
been detected, click the Yes button.
6. Click the Finish button and restart your
computer if you are prompted to do so.
5-3 Installing Creative PC-CAM 950 Slim
Figure 5-3: Digital Signature Not Found
dialog box