Previewing A Photo; Selecting A Flash Mode; Recording A Video; Replaying A Recording - Creative PC-CAM 950 Slim User Manual

PC-CAM 950 Slim.book Page 2 Tuesday, August 23, 2005 12:57 PM
1. Press and hold the Mode button.
Previewing a
Photo
2. Use the Function buttons to select the Playback mode
3. Press the Flash/Set button.
4. Use the Function buttons to locate your picture on the LCD screen.
5. To exit Play mode, press and hold the Mode button.
In Capture mode
Selecting a
Flash mode
•
•
1. Make sure that your camera is not connected to your computer.
Recording a
Video
2. Press and hold the Power button to turn on your camera.
3. Press and hold the Mode button.
4. Use the Function buttons to select the Movie mode
5. Press the Flash/Set button
6. Compose your picture and press the Shutter button to begin recording
7. Press the Shutter button again to stop recording.
1. Press and hold the Mode button.

Replaying a Recording

2. Use the Function buttons to select the Playback mode
3. Press the Flash/Set button.
The mode selection menu appears.
, press the Flash/Set button to choose a flash mode:
Auto flash — the flash is used automatically when required
No flash — the flash is disabled
The mode selection menu appears.
The elapsed time, in seconds, is shown at the upper left corner of the LCD.
The mode selection menu appears.
Using Creative PC-CAM 950 Slim as a Digital Camera
icon.
icon.
icon.
3-2