Prime Engineering KidWalk Owner's Manual page 9

Note: If you have accessories that are not listed in this manual, the instructions for their
installation and use will be packed with them.
Lateral Chest
System Assembly
Fig. 7
Depth Adjust Screw
Height Adjust Screw
KidWalk
**Note: must be used with it's Anti-Tippers or Cruiser Wheels at all times. **
**Note: Do NOT remove the Anti-Tippers or use the
Wheels at any time.**
KidWalk
Owner's Manual
ASSEMBLY INSTRUCTIONS
Assembly for optional accessories:
Extension Tube
Adjustment
Screws
Receiver Tube
Fig. 8
KidWalk
9
Lateral Chest System

Slide the Extension Tube into
the top of the Receiver Tube.
Set pads at proper heights
and tighten both adjustment
screws (fig. 7).
Headpad or Headrest

Insert the Headpad
Headrest supplied with the unit
into the extension tube with pad
facing forward - tighten height
and depth adjustment screws
(fig. 8).
without Anti-Tippers or the Cruiser
or the