Removing The Client And Transport And Storage - Prime Engineering KidWalk Owner's Manual

REMOVING THE CLIENT
After removing the client:

Make sure that all screws and knobs are tight.

Make sure that all components are still with the system.

Locate and properly store any removable items, i.e. Leg Wraps, Body Wraps, Leg Straps, when
used and store them so they stay with the KidWalk.

Store the KidWalk out of the elements.

Wipe off any spilled fluids or food.

Inspect all moving parts.

Notify your dealer of any item that you see that does not look right.
 Due to all of the moving parts on a KidWalk and the dynamic movement of the system, a
regular visual and hands on manual inspection is recommended.
Mast Release Pin
Pull Out
Fig. 22
Note: Never leave a client unattended
KidWalk
while using the
KidWalk
Owner's Manual
Removing the client:
To remove the client from the

Set the wheel locks.

Squeeze the sides of the buckles on the forward
pads on hip assembly (and lateral chest system
if applicable) to release (fig. 21).

Rotate the forward pads upward and outward to
allow clearance to exit.

Remove any other restraint i.e.: Leg Wraps,
Body Wraps, Leg Straps, if applicable.

Fig. 21
Lift client forward and out of unit.
Transport and Storage:
KidWalk
The
transport or storage.

The mast may be removed by pulling outward on
the release pin and rotating until it is in the lockout
position (fig. 22). The mast can now be lifted off
of the base assembly.

The large wheels may be removed by pressing
inward on the axle pin button while pulling out-
ward on the wheel.
Note: Make sure that any axle spacers remain on
the axle when removing the wheels.
16
TRANSPORT & STORAGE
KidWalk:
may be disassembled for ease of