Removing The Client - Prime Engineering KidWalk Owner's Manual

Dynamic mobility system
Table of Contents

Advertisement

Fig. A
Note: Never leave a client unattended while using the
KidWalk
Owner's Manual

REMOVING THE CLIENT

Removing the client:
To remove the client from the
Set the wheel locks.
Squeeze the sides of the buckles on the
front pads on hip assembly (and lateral
chest system if used) to release (fig. A).
Rotate the front pads upward and outward
to allow clearance to exit.
Remove any other restraint i.e.: Leg Wraps,
Body Wraps, Leg Straps, if applicable.
Lift client forward and out of unit.
After removing the client:
Make sure that all screws are tight.
Make sure that all components are still with
the system.
Locate and properly store any removable
items, i.e. Leg Wraps, Body Wraps, Leg
Straps, when used and store them so they
stay with the KidWalk.
Store the KidWalk out of the elements.
Wipe off any spilled fluids or food.
Inspect all moving parts.
Notify your dealer of any item that you see
that does not look right.
 Due to all of the moving parts on a
KidWalk and the dynamics of the system
a regular visual and hands on inspection
is recommended.
KidWalk.
13
KidWalk:

Advertisement

Table of Contents
loading

Table of Contents