Prime Engineering KidWalk Owner's Manual page 10

Measurements
and
Initial setup information
for your
KidWalk
Dynamic Mobility Device
KidWalk setup should be completed by a technically and clinically
competent person who has been trained in the use and setup of the
product.
A written record is recommended to be maintained of all clinical
set ups for this product. (See Page 4)
Recommended set up order for the KidWalk:
1. Take client's measurements
2. Adjust seat height
3. Adjust the load compensating spring
4. Adjust hip support width and depth
5. Adjust lateral chest system width and depth
6. Place client into KidWalk
7. Fine tune hip width and depth
8. Fine tune chest width and depth
9. Fine tune seat height
10. Adjust mast angle
KidWalk
Owner's Manual
10