Chapter 3 - Basic Configuration Instructions
3.6
Ethernet Interface Configuration
In the most basic form Ethernet interface can be configured as follows:
ifc
onfig eth0 1.1.1.1/24 up
UP flag means than the interface is turned to UP state.
Also you can specify the following parameters for the Ethernet interface:
Media type. By default media type is selected automatically (media auto
parameter).
Assign aliases to the Ethernet interface (alias key word)
Full information about interfaces configuration can be reviewed in OS WanFlex
User Guide - ifconfig command.
Alvarion BreezeNET B130/B300 GigE
47
Ethernet Interface Configuration
Technical User Manual