Table of Contents
Advertisement
To install the E1200 system:
Step
Task
Prepare the site
1
Unpack the AC chassis and components
2
or
Unpack the DC chassis and components
Mount the AC chassis
3
or
Mount the DC chassis
Install the cable management system
4
Install components:
5
• Fan trays
• Power Supplies (including power and
grounding cables)
Verify power supply and fan tray operability
6
Install card components:
7
• RPM(s) and line cards
• SFM3s
Connect network cable
8
Supply power to the chassis
9
Initial boot
10
14
|
The E1200 System
Section
Site Preparation
Unpacking the E1200 System
Unpacking the E1200 System
Standard Front Chassis Mounting
Installing the Chassis into an Equipment Cabinet
Standard Front Chassis Mounting
Installing the Chassis into an Equipment Cabinet
See the instructions that come with the cable management system.
Installing Fan Trays
Installing AC Power Supplies
Installing DC Power Supplies
AC Power Supply and Fan Operability Test
DC Power Supply and Fan Operability Test
Installing Line Cards and RPMs
Installing Switch Fabric Modules (SFM3s)
RPM Ports and Cables
Supplying Power - AC
Supplying Power - DC
The initial boot operation automatically brings up the system to the
runtime CLI. To interrupt the automatic boot process, issue a break
key sequence (Ctrl^) if you experience boot problems.
The console monitor will display the default BOOT_USER # prompt.
Refer to
Chapter A, System Boot
process.
for instructions to continue the boot
Advertisement
Table of Contents
