EDITING
Edit To Or
From Another
VCR
Connection
Ex. When using this VCR as the playback VCR
To AUDIO/
VIDEO OUT
Another VCR
(for recording)
This VCR (for playback)
R
L
Audio/video cable
(not supplied)
To Audio/
video Input
You can use your VCR as the playback or recording VCR.
Refer also to the other VCR's instruction manual for
1
connection and its operations.
Make connections
Connect an audio/video cable between the
playback VCR's audio/video output connectors
and the recording VCR's audio/video input
connectors.
When using this VCR as the recording VCR,
connect this VCR's audio/video input
connectors to the audio/video output
connectors on the other VCR.
If the playback VCR is monaural, connect the
audio output connector on the playback VCR to
2
the left audio input connector on this VCR.
Load cassettes
Insert the playback cassette into the playback
VCR and the cassette to be recorded on into the
3
recording VCR.
Select input mode on recording VCR
Select the correct external input on the other
VCR.
On this VCR (when using this VCR as the
recording VCR);
Select "L-1" — when connecting the camcorder
Select "F-1" — when connecting the camcorder
On the front panel:
Press CH 5∞.
On the Remote:
4
Press the Number key "0 (AUX)" or CH +/–.
Select EDIT function
Set the EDIT function to "ON".
ON this VCR, follow the procedure described
5
on pages 38 and 39.
Start playback
Press PLAY ( 3 ) on the playback VCR.
NOTE:
If the playback VCR is equipped with a superimpose/
OSD disable feature then set it to "OFF" before starting
6
playback (
pg. 38 and 39).
Start recording
Press REC ( ¶ ) on the recording VCR.
NOTE:
Be sure to select "AUTO" for "PICTURE CONTROL" (or
"NORM" when "VIDEO CALIBRATION" is set to "OFF") after
you finish dubbing the tapes (
EN
to the audio/video input
connectors on the rear panel.
to the audio/video input
connectors on the front panel.
pg. 38 and 39).
43