Tuner Setting; Setting Channels Automatically; Auto Channel Set - JVC HR-VP78U Instructions Manual

Tuner Setting

Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
1 4
2 3
POWER
MENU
VIDEO (MONO)L—AUDIO—R
OK
1
4
7
1
1 4
REW
PLAY
SP EP
CH
VCR REC
SP/EP
2 3
2 3
2
5 6
8 9
0
4
2 3
2 3
Setting channels
automatically —
Use Auto Channel Set only if channels have not been set
correctly by the Plug & Play setting or if you use a cable
box. If you want to add or delete channels, use Manual
1
Channel Set (
Access Main Menu screen
Press MENU.
Access Tuner Set screen
2
On the front panel:
Press CH 5∞ to move
the highlight bar (arrow)
FF
to "TUNER SET", then
press OK.
On the Remote:
STOP/EJECT PAUSE
Press SHUTTLE PLUS
%fi to move the highlight bar (arrow) to "TUNER
SET", then press OK or SHUTTLE PLUS #.
Perform Auto Channel Set
3
You can automatically
set the receivable
channels in your area in
the order of their
frequencies.
On the front panel:
Press CH 5∞ to move
the highlight bar (arrow)
to "AUTO CHANNEL
SET", then press OK.
On the Remote:
Press SHUTTLE PLUS
%fi to move the
highlight bar (arrow) to
"AUTO CHANNEL
SET", then press OK or SHUTTLE PLUS #.
NOTES:
When Auto Channel Set is complete, "SCAN
COMPLETED" appears on screen.
If the scan was unsuccessful, "SCAN COMPLETED–
NO SIGNAL" appears on screen. Check the
connections and start again.
Return to normal screen
4
Press MENU.
INFORMATION
The VCR selects the correct band (TV or CATV)
automatically during Auto Channel Set.
The selected band will be displayed on the right side of
"BAND" on the Tuner Set screen.

Auto Channel Set

pg. 14).
FUNCTION SET
= TUNER SET
INITIAL SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
BAND
=AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
PRESS (MENU) TO END
13
EN
MAIN MENU
TUNER SET
CATV
SCANNING...