2Nd Audio Record; Audio Monitor; Av Compu-Link - JVC HR-VP78U Instructions Manual

2ND AUDIO RECORD

ON
OFF

AUDIO MONITOR

HI-FI: Normally select this.
Hi-Fi sound is played
back.
HI-FI L: Sound on the left Hi-Fi
channel is played back.
HI-FI R: Sound on the right Hi-Fi
channel is played back.
NORM: Sound on the normal track
is played back.
MIX: Both sounds on the Hi-Fi
track and normal track are
mixed and played back.

AV COMPU-LINK

ON
OFF
AV COMPU LINK
Television
To AV COMPU
LINK II
(VCR ONLY)
When this function is set to "ON";
If a SAP program is received, the SAP audio is recorded on both the
normal and Hi-Fi tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on both
the Hi-Fi and normal tracks.
When this function is set to "OFF", the SAP audio cannot be recorded.
This VCR can record two sound tracks simultaneously (normal and Hi-
Fi) on a Hi-Fi stereo tape.
You can select the sound track(s) to listen to while playing back a Hi-Fi
stereo tape.
In addition, when playing back a prerecorded tape containing two
separate audio programs on the Hi-Fi tracks, you can choose either one
by selecting either "HI-FI L" or "HI-FI R".
NOTES:
While playing back a monaural tape, sounds on the normal track will be heard
regardless of this setting.
If RF connection (
monaural even though you select "HI-FI".
You can also use the A. MONITOR button on the Remote to select the desired
monitor sound. (
The REMOTE PAUSE/AV COMPULINK terminal on the rear panel can be used
as either the REMOTE PAUSE terminal or the AV COMPULINK terminal.
When this function is set to "ON", you can use the this terminal as the
AV COMPULINK terminal.
By connecting other JVC's AV COMPULINK components (see the
diagram below), including amplifiers (or receivers) and televisions, one
touch control of the audio and video components linked via their AV
COMPULINK connectors becomes possible.
For example: simply load a cassette in the VCR and press PLAY ( 3 ) and the
AV COMPULINK components automatically turn on, the TV's AV mode is
selected and the VCR starts playback. (You do not have to press PLAY ( 3 ) if
the cassette's record safety tab is removed.)
When this function is set to "OFF", you can use this terminal as the
REMOTE PAUSE terminal. (
NOTE:
Connection varies depending on the type of JVC TV you have. Refer to the TV's
instruction manual when making this connection.
To AUDIO/
VIDEO IN
Audio/video cable (not supplied)
Mini-plug cable (not supplied)
* The default setting is bold in the table below.
pg. 7) is used for viewing pictures on the TV, sound will be
pg. 23)
pg. 45)
This VCR
To AUDIO/
VIDEO OUT
41
EN
R
L
To REMOTE
PAUSE/
AV COMPULINK