TaiwanSys G.SHDSL.bis User Manual page 44

Press Add on the bottom of web page to add the static bridge information.
If you want to filter the designated MAC address of LAN PC to access Internet, press Add to
establish the filtering table. Put the MAC address in MAC Address field and select Filter in LAN
field.
If you want to filter the designated MAC address of WAN PC to access LAN, press Add to establish
the filtering table. Key the MAC address in MAC Address field and select Filter in WAN field.
For example: if your VC is setup at WAN 1, select WAN 1 Filter.
Press Finish on the bottom of web page to review the bridge parameters.
The screen will prompt the parameters that will be written in NVRAM. Check the parameters before
writing in NVRAM.
Press Restart to restart the router working with new parameters or press Continue to setup
another parameter.
G.SHDSL.bis Router User Manual V0.01
43