TaiwanSys G.SHDSL.bis User Manual page 24

The flow chart of bridge mode setup:
Setup up system mode and SHDSL mode
Click Bridge and CPE Side to setup Bridging mode and then click Next for the next setting.
This router can be setup as one of two SHDSL.bis working mode: CO (Central Office) and CPE
(Customer Premises Equipment).
For connection with DSLAM, the SHDSL.bis router's operation mode is CPE. For "LAN to LAN"
connection, one side is CO and the other side is CPE.
Set up (a) LAN: IP address, Subnet Mask, Default Gateway, DNS Servers and Host Name
(b) WAN1: VPI,VCI and Encapsulation
LAN:
IP: 192.168.0.1
Subnet Mask: 255.255.255.0
G.SHDSL.bis Router User Manual V0.01
23