Changing Units (Imperial, Us Or Metric) - Triumph Tiger Operation Manual

Once both hours and minutes are correctly
set, press button 'B' to confirm and t-SEt will
be visible in the display screen. Press and
release button 'A' until return is visible then
press button 'B'. Trip 1 will be visible in the
display screen.
2
3
5
6
1
cfio_2
1. Clock display
2. Hours read-out
3. Minutes read-out
4. Display screen (Hour selected for
adjustment)
5. Button A
6. Button B
General Information
Changing Units (Imperial, US
or Metric)
Units has four selectable display modes as
described below:
• mpg - Imperial gallons;
• mpg US - US gallons;
• L/100 km - Metric;
• km/L - Metric.
Each display
information:
mpg (Imperial gallons)
The speedometer and odometer will read in
miles. The
measured in imperial gallons.
mpg US (US gallons)
The speedometer and odometer will read in
4
miles. The
measured in US gallons.
L/100 km (Metric)
The speedometer and odometer will read in
kilometres. The fuel consumption will be
measured in litres of fuel per 100 km.
km/L (Metric)
The speedometer and odometer will read in
kilometres. The fuel consumption will be
measured in kilometers per litre of fuel.
Do not attempt to change the units display
with the motorcycle in motion as this may
lead to loss of motorcycle control and an
accident.
To access the units display, turn the ignition
to the ON position.
provides the following
fuel consumption will be
fuel consumption will be
Warning
23