Ignition Switch/Steering Lock; Ignition Switch Positions - Triumph Tiger Operation Manual

General Information

Ignition Switch/Steering Lock

2
4
P
5
1. Ignition switch/Steering lock
2. OFF position
3. ON position
4. LOCK position
5. PARK position

Ignition Switch Positions

This is a four position, key operated switch.
The key can be removed from the switch
only when it is in the OFF, LOCK or P (PARK)
position.
To LOCK: Turn the key to the OFF position,
push and fully release the key, then rotate it
to the LOCK position.
To PARK: Turn the key from the LOCK
position to the P position. The steering will
remain locked. The front position lights, rear
light and licence plate light will illuminate.
28
Note:
• Do not leave the steering lock in
the P position for long periods of
3
time as this will cause the battery
to discharge.
1
For reasons of security and safety, always
move the ignition switch to the OFF
position and remove the key, when leaving
the motorcycle unattended.
Any unauthorised use of the motorcycle
may cause injury to the rider, other road
users and pedestrians and may also cause
damage to the motorcycle.
With the key in the LOCK or P position the
steering will become locked.
Never turn the key to the LOCK or
P positions while the motorcycle is moving
as this will cause the steering to lock.
Locked steering
motorcycle control and an accident.
Warning
Warning
will cause loss of