Coolant Temperature Gauge - Triumph Tiger Operation Manual

General Information
Press and release button 'A' until set up is
visible in the display screen then press
button 'B'.
Press and release button 'A' until UnitS is
visible then press button 'B'.
2
3
1
cfio_6
1. Display screen
2. Button A
3. Button B
Press and release button 'A' until the desired
display is visible. The display will scroll
through in the following order:
• mpg - Imperial gallons;
• mpg US - US gallons;
• L/100 km - Metric;
• km/L - Metric.
Press button 'B'. Do not touch buttons 'A' or
'B' until UnitS is visible in the display screen.
When UnitS is visible in the display screen,
press and release button 'A' until return is
visible then press button 'B'. Trip 1 will be
visible in the display screen.
24

Coolant Temperature Gauge

1
cfio_4
1. Coolant temperature gauge
The coolant temperature gauge indicates the
temperature of the engine coolant.
When the ignition is switched on, all 8 bars of
the display will be shown. When the engine is
started from cold the display will show 1 bar.
As the temperature increases more bars will
be shown in the display. When the engine is
started from hot the display will show the
relevant number of bars, dependant on
engine temperature.
The normal temperature range is between
3 and 5 bars.
If the coolant temperature becomes too high
the display will show 8 bars and will start to
flash. The high coolant temperature warning
light in the tachometer will also be
illuminated.
Caution
Do not continue to run the engine if either
of the high temperature warnings are
displayed as severe engine damage may
result.