Connecting The Connection Cord; Wiring Diagram - Samsung Cassette Type Series Installation Manual

Connecting the connection cord

CAUTION
Always remember to connect the refrigerant pipes before performing the electric connections.

When disconnecting the system, always disconnect the electric cables before disconnecting the refrigerant pipes.
Always remember to connect the air conditioner to the grounding system before performing

the electric connections.
14
E-
The indoor unit is powered by the outdoor unit by means of a H07 RN-F
connection cable (or a more power model), with insulation in synthetic rubber
and jacket in polychloroprene(neoprene), in accordance with the requirements
of standard EN 60335-2-40.
1
Remove the screw on the electrical component box and remove the cover plate.
2
Route the connection cord through the side of the indoor unit and connect
the cable to terminals; refer to the figure below.
3
Route the other end of the cable to the outdoor unit through the ceiling &
the hole on the wall.
4
Reassemble the electrical component box cover, carefully tightening the screw.

Wiring diagram

Indoor unit
Outdoor unit
Communication
Size of the cables used to interconnect the indoor and outdoor units.
Indoor-Outdoor units Power(±10%)
Power supply 220-240V~, 50Hz
Communication
Cable H07 RN-F
Power
Power cable
2
0.75mm , 3wires
- 0.75mm 2 , 2wires
Max. Length
1Km
1Km