Table of Contents
Advertisement
Install the lower part of the inner tube in a vise.
o
Exerting too much pressure on the lower part of the inner
tube can damage it and affect the stability of the ride.
Do not overtighten.
Remove the rubber cap (M) located under the lower part
o
of the inner tube.
Remove the spring stop washer (S).
o
Unscrew and remove the cartridge, by inserting a 14
o
mm allen key in the compression adjustment, and by
inserting the special "T" tool (T) (long tube, three prongs
at one end) provided with the maintenance tool kit into
the cartridge head.
l NOTICE:
Before unscrewing the cartridge, make sure the special tool (T)
is well fitted into the socket in the cartridge head.
Empty the content of the cartridge (L) by pumping the
o
piston rod (G) several times, until the cartridge is empty.
Never attempt to modify the cartridge!
Refer to authorized personnel to carry out this operation.
Modifications to the cartridge carried out by an
unauthorized person can compromise the security of the
operator and invalidate the warranty.
Move the outer tube slowly back and forth for a few
o
complete strokes to make sure it is in good working
order.
Remove the dust seal (M).
o
t t CAUTION
u u WARNING
FRONT FORK AND SKI 11 – 9
Advertisement
Table of Contents
