JVC HR-S9900U Instructions Manual page 33

Other useful functions for recording
Recording Resume Function
If there is a power outage during recording (including
Instant Timer Recording, timer recording, and Satellite
Auto Recording), the recording will resume automatically
when the power is restored to the VCR. (No setting is
required for this function.)
Video Calibration ( pg. 57)
When this function is set to "ON", this VCR checks the
condition of the tape in use during playback and
recording, and compensates to provide the highest-
possible pictures.
Second Audio Recording (
This VCR's built-in MTS decoder enables reception of
Multichannel TV Sound broadcast.
To record a SAP program received, set "2ND AUDIO
RECORD" to "ON" using the menu screen.
NOTES:
When the channel is changed on the VCR;
The "STEREO" indication appears on the screen for about
5 seconds if the program is a stereo broadcast.
The "SAP" indication appears on the screen for about 5
seconds if the program is a SAP broadcast.
Both indications appear when a stereo program is
accompanied by SAP sound.
S-VHS Recording Mode (
This VCR allows you to record on an S-VHS tape with VHS
picture quality.
pg. 58)
pg. 59)
Accidental erasure prevention
To prevent accidental
recording on a recorded
cassette, remove its record
safety tab.
To record on it later, cover
the hole with adhesive tape.
33
EN
Record safety tab