JVC HR-S9900U Instructions Manual page 29

To pause recording
Press PAUSE ( 8 ). To resume recording, press PLAY ( 3 ).
To stop recording
Press STOP ( 7 ) on the Remote or STOP/EJECT
( 7 / 0 ) on the front panel.
To rewind the tape (when it is not running)
Press REW ( 1 ) (or turn the TIME SCAN SHUTTLE
ring on the front panel to the left).
To fast-forward the tape (when it is not running)
Press FF ( ¡ ) (or turn the TIME SCAN SHUTTLE ring
on the front panel to the right).
To eject the tape
Press STOP/EJECT ( 7 / 0 ) on the front panel when the
tape is not running.
You can also eject the cassette when the VCR is turned
off.
To turn off the VCR
Press POWER.
NOTE:
If "MEMORY FULL" appears on the display when you start
recording, the VCR's memory for the Video Navigation function
is full. This is not related to actual recording, so you can finish
recording normally, but the Video Navigation information such
as recording date, start time, end time, and channel number will
not be stored in memory.
It may be unlawful to record or play back
copyrighted material without the consent of the
copyright owner.
29
EN