Table of Contents
Advertisement
16
EN
Next Function Memory
The Next Function Memory "tells" the recorder what to do after
rewinding. Before continuing, ensure that the recorder is in the
Stop mode.
a– For Automatic Start Of Playback After Tape Rewind...
...press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind...
...press REW, then press
c– For Automatic Timer Standby After Tape Rewind...
...press REW, then press ‰ ‰ ‰ ‰ ‰ within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer functions if the
cassette's record safety tab is removed.
Tape Position Indicator
The tape position indicator
appears on screen when, from
the Stop mode, you press FF,
REW or perform an Index
Search. The position of "5" in
relation to "0" (beginning) or "+"
(end) shows you where you are
on the tape.
"O.S.D." (
pg. 10) must be
set to "ON", or the indicator
will not appear.
NOTE:
Depending on the type of tape used, there may be times when
the indication is not correct.
Soundtrack Selection
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing AUDIO on the remote control changes the soundtrack being played back as follows:
TRACK
Recorder's Front Panel
NORM
NORM
within 2 seconds.
3
+
+
0
1:23:45
REMAIN 1:00
Beginning
On-Screen Display
HI FI
For Hi-Fi stereo tapes
L
R
HI FI
For main audio of Bilingual tapes
L
HI FI
For sub audio of Bilingual tapes
R
NORM
For audio-dubbed tapes
HI FI
For audio-dubbed tapes
NORM
Skip Search
SKIP OVER UNWANTED
SECTIONS
1
Press 30 SEC 1 to 4 times during playback. Each press
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search, press PLAY.
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE INSTANT
+
REVIEW
1
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
End
of the last timer-recorded programme. Once it's found,
playback begins automatically.
The front display panel tells you how many
programmes have been recorded. If you have, for
example, 3 programmes, "REVIEW" and "3" appear
and blink. To watch the first of the 3 programmes,
press REVIEW three times. The recorder searches and
begins playback automatically. You can access a
programme as far as 9 index codes away from the
current tape position.
NOTE:
Instant ReView is not possible while the recorder is in the Timer
mode.
USE
PLAYBACK (cont.)
NOTES:
"
" should normally be
selected. In this mode, Hi-Fi stereo
tapes are played back in stereo, and
the NORM track is played back
automatically for tapes with only
normal audio.
For instructions on recording stereo
and bilingual programmes, refer to
page 19.
"O.S.D." must be set to "ON" or the
on-screen displays will not appear
(
pg. 10).
Hide quick links:
Advertisement
Table of Contents
