User Program Mode; How To Enter And Exit Up Mode - Ricoh A193 Service Manual

USER PROGRAM MODE

3. USER PROGRAM MODE
The user program (UP) mode is accessed by users and key operators, and
by sales and service staff. UP mode is used to input the copier's default
settings.

3.1 HOW TO ENTER AND EXIT UP MODE

Press the User Tools button, then select the UP mode program. After
selecting the UP mode program, press the User Tools button to exit UP mode.
UP Mode Table (System Settings)
1. Function Priority
2. Clear Function Setting
3. Panel Beeper
4. Copy Count Display
5. Auto Reset
6. Function Timeout
7. Auto Energy Saver
8. Energy Save Mode
9. Auto Shut Off
10. Special Paper Size
11. Paper Tray Priority
12. Auto Tray Switch
13. By-pass Auto Select
14. Output Tray
15. Simultaneous Print
16. Contrast
17. Set User Codes
18. Restricted Access
(A193)
1. System Auto Reset
2. Copy Reset
3. Fax Reset
4. Printer Reset
1. Copier
2. Fax
3. Printer
1. Copy User Codes
2. Fax User Codes
3. Printer User Codes
1. Reset Counters
2. Register User Codes
3. Change/Delete User Codes
4. Key Operator Code
5. Register/Change Key Operator Code
6. Copier Access
7. Fax Access
8. Printer Access
4-42 SM