Setting Up The Alphatrak Meter - Abbott AlphaTrak User Manual

Setting Up The Meter
• To Enter Setup Mode
Start with the meter off . Press and firmly hold the "m" button
until the set display screen appears .
• To Exit at Any Time
Press and hold the "m" button until the meter powers off .
• How to Move Through the Screens
Press the "m" button to move through all the setup screens such
as sound level, time, date, and so on .
Press the "c" button to change settings within a setup screen .
Setting the Sound
There are three sound volume options: Off, Low, and High
(default setting) . Press the "c" button until the desired sound level
appears . Press the "m" button to move to "Setting the Time . "
OFF
10
ART16065_Rev-A-Man.indd 10-11
LOW HIGH
Setting the Time
1 . With the hour blinking, press the "c" button
until the correct hour appears . If using the
12-hour time format, be sure to press the "c"
button until the correct choice between "AM"
and "PM" appears .
HOUR
2 . Press the "m" button to move to minute
setting .
3 . With the minute blinking, press the "c" button
until the correct minute appears .
4 . Press the "m" button to move to "Setting the
Date . "
MINUTE
Setting the Date
1 . With the day blinking, press the "c" button
until the correct day appears .
2 . Press the "m" button to move to the month
setting .
3 . With the month blinking, press the "c" button
DAY
until the correct month appears .
4 . Press the "m" button to move to the year
setting .
5 . With the year blinking, press the "c" button
until the correct year appears .
MONTH
6 . Press the "m" button to move to "Setting the
Unit of Measurement . "
YEAR
11
7/29/08 5:22:19 PM