Adding An Item To The Wash; Setting A Delay Start - Baumatic BDWS60SS User Manual

Adding an item to the wash

NOTE: If you open the door during a wash cycle the machine
will pause. When you close the door the machine will continue
working after 10 seconds.
o Slightly open the appliance door and wait for the spray arms to stop
working. This will avoid scalding by hot water.
o Fully open the door and add your required item to the basket.
o Close the door. The appliance will resume the wash after 10
seconds.

Setting a delay start

It is possible to delay the start of the wash program for up to a
maximum of 24 hours. The delay can be set in 1 hour intervals.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in accordance
with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent
o Close the door firmly, so that you hear the door lock click shut.
o Turn the appliance on by using the ON/OFF button.
IMPORTANT: Wait for 5 seconds before pressing the program
selection button, otherwise the appliance may not function
correctly.
o Press the program selection button to choose an appropriate wash
program for the load that you are washing. The relevant program
indicator neon will light to show which program you have selected.
o Then press the delay start button and you will see the amount of
time that you are delaying the wash program by appear in the LED
display (1, 2, 3,....23, 24 hours).
o Once the period of time that you set has passed, the dishwasher
will start the wash program that you selected.
23