Table of Contents
Advertisement
Enterprise IP Phone
Configuration and Registration
If you are administrator, you need to do some simple configuration to make the
phone work. If not, please contact with your internet administrator or service
provider for more details.
Network Configuration
The network information can be set and check by the phone operations:
1) Network configuration
1. DHCP:
Pick up the handset and dial "**88＃", after hearing the prompt "Please enter the
value after beeping", please input "1＃" to enable DHCP，or "0＃" to disable DHCP,
you will hear prompts "
tone
" to indicate that the configuration is successful.. Input other characters or
numbers without #, for example input 222, you will hear prompts "Invalid setting,
please re-enter after the tone" to indicate that the configuration is failed.
2. Static IP:
IP Address: Pickup the handset and dial "**80＃", after hearing the prompt "
enter
the
value
example:192.168.1.56＃), you will hear prompts "
or continue setting after the tone
input IP Address is not in conformity with the rules or without ＃, it will prompt
Invalid setting, please re-enter after the tone
"
Subnet Mask: Pickup the handset and dial "**81＃", after hearing the prompt
Please enter the value after beeping
"
example:255.255.255.0#), you will hear prompts "
rebooting or continue setting after the tone
successful. If the input Subnet Mask is no in conformity with the rules or without ＃,
Invalid setting, please re-enter after the tone
it will prompt "
configuration is failed.
Please hang up and wait for rebooting or continue setting after the
after
beeping
",
" to indicate that the configuration is successful. If the
please
input
the
Please hang up and wait for rebooting
" to indicate that the configuration is failed.
", please input the Subnet Mask (For
Please hang up and wait for
" to indicate that the configuration is
- 4 -
Getting Started
Please
IP
address
" to indicate that the
For
(
Advertisement
Table of Contents
