Table of Contents
Advertisement
Enterprise IP Phone
specific ring times.
To configure Call Forward via Web interface:
Choose Phone->Features->Forward to do the relating changes. Please refer the
above configuration information.
During an Active Call
Mute
This function allows you to mute the microphone of the active audio device during a
call; you can not be heard by the other party. You can still hear all other parties while
mute is enabled.
To mute/resume the conversation:
Press the MUTE button during a conversation to mute the call, and press it again to
get the microphone return to normal conversation.
Call Hold
This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/resume a call:
1) Press the HOLD button to put your active call on hold.
2) During the call, there will be a "dudu.." sound for each 30 second, suggesting
that there is a call in Hold state.
3) If there is only one call on hold, press the HOLD button again to retrieve the call.
4) If there are two calls,
switch between the two calls.
Note:
When you are under the call hold status, putting down the handset, the conversation
will not be hung up, the indication LED will prompt that the conversation is still in
progress. Pick up the handset, it will resume the call automatically.
Call Waiting
This call feature allows your phone to accept other incoming calls to the extension no
matter under which circumstances.
To enable/disable Call Waiting via Web interface:
Choose Phone->Features->Call Waiting to do the relating changes.
Using the Basic Phone Functions
it can only be one call on hold
- 16 -
, press the hold button to
Advertisement
Table of Contents
