Enterprise IP Phone
Basic Feature
Advanced Feature
Note:
The above table only indicates most of phone functions rather than all of them.
Please refer to the relating parts for more details.
User and Administrator Mode
Your phone can be used in user or administrator mode. Administrator mode is the
default setting with full configuration rights. The default administrator password is
admin.
Customizing Your Phone
General Settings
Phone Status
You can check the network status of your phone by keypad, or check the phone
status by Web interface.
To operate via the keypad, please refer to the above "Network configuration".
To view the Phone Status via Web interface:
Open the web browsers and input the IP Address http://WAN-ip-address; Enter the
account and password (default account and password are both "admin"), choose
--Ring Tone
--Phone Volume
--Accounts
--Network
--Reset Factory
--Set AES Key
--Set admin PWD
--Voice
Upgrade
--
- 10 -
Overview