Table of Contents
Advertisement
Enterprise IP Phone
Using the Advanced Phone Functions
Account Setting
Please refer to the previous part "Configuration and Registration" for the basic
account setting information. The following table lists the instruction of the field about
the advanced Account Setting.
Field Name
UDP
Keep-alive
Message
UDP
Keep-alive
Interval
Login Expire
Local SIP Port
RPort
SIP Session Timer
Subscribe
Period
DTMF Type
You can consult your system administrator for more information.
Network Setting
VLAN Setting
VLAN is a group of hosts with a common set of requirements that communicate as if
they were attached to the Broadcast domain, regardless of their physical location.
The following table lists the instruction of the field about the VLAN Setting.
Field Name
Using the Advanced Phone Functions
Defines
whether
mechanism. The default is Enabled.
This parameter specifies how often the phone will send a
packet to the SIP server. Default is 30 seconds.
This parameter specifies the time frequency that phone
refreshes its registration. The default interval is 3600
seconds.
Local SIP port. The default value is 5060.
The parameter allows you configuring the proxy to send
responses back to a particular address and port. The default
is disabled.
This document defines an extension to the Session Initiation
Protocol (SIP). This extension allows for a periodic refresh of
SIP sessions through a re-INVITE or UPDATE request. The
refresh allows both user agents and proxies to determine if
the SIP session is still active.
This parameter could set the period of the subscription. The
default value is 3600.
Select the DTMF type.
- 19 -
Description
to
active
the
phone
Description
UDP
Keep-alive
Advertisement
Table of Contents
