Table of Contents
Advertisement
Enterprise IP Phone
Customizing Your Phone
Status directly to check the status.
Audio Setting
Volume
You can adjust the volume of handset/ring tone/signal tone.
To adjust the volume when you are in an active call:
When Handset mode is activated, press the Volume Adjustment Bar to adjust the
volume of signal tone to a comfortable level. When phone is idle, press it to adjust
the volume of ring tone. And during a call, press it to adjust the volume of handset.
Note:
The volume can only be set via the volume adjustment bar on the keypad.
Ring Tone
You can adjust the type and volume of the ring tone.
To change the Ring Tone Type via Web interface:
Choose Phone->Preference->Ring Type, highlight the specific one in the scroll-down
menu, click confirm button to update the change.
Codec Selection
The IP phone supports the following voice codecs:
G723_63，G722，G726-16，G726-24，G726-32，G726-40，PCMA，G729，PCMU
and G723_53。
You can enable/disable the desired codecs via Web interface. Please contact your
System Administrator for more details about the codecs.
To enable/disable the codecs:
1) Choose Account->Codecs.
- 11 -
Advertisement
Table of Contents
