3-16Removing The Panel-Side - Samsung NE59J7630SS Service Manual

3. Disassembly and Reassembly

3-16Removing The Panel-Side

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating range.
Failure to do so can result in death or electrical shock.
PRECAUTION
When you work on the electric range, be careful when handling the sheet metal parts.
Sharp edges may be present, and you can cut yourself if you are not careful.
Parts
Panel
Side
* Reassembly of All part is the reverse order of disassembly.
Screw
- Terminal Block Screw : M4 X 25.
- Regulator Screw : M4 x 10 (STS, Machine)
- The others : M4 X 10.
This document can not be used without Samsung's authorization.
Explanation Photo
28
Explanation
1. Turn off the electrical supply.
2. Remove the oven door from the range
(see page 23 for the procedure).
3. Pull the range away from the wall so you
can access the back of the unit.
4. Remove the 6 screws from the rear of
Panel-Side and remove Cooktop/
(see step 3~4 on page 3-3).
5. Remove the 3screws from the top of each
Panel-Side.
6. Pull the back of the side panel out from
7. Push forward and remove Panel-Side.