Table of Contents
Advertisement
2.1 POWER ON
Command "A00"[CR] (Hex: 41 30 30 0d)
Details
Power on when projector standby
OK
Return
NG
2.2 POWER OFF (Power OFF immediately)
Command "A01"[CR] (Hex: 41 30 31 0d）
Details
Power Off immediately
OK
Return
NG
2.3 POWER OFF
Command "A02"[CR] (Hex: 41 30 32 0d）
Details
"Power off?" displays while send the command, just like press the "POWER"key.
OK
Return
NG
2.4 Computer1
Command "A05"[CR] (Hex: 41 30 35 0d）
Details
Change the input to "Computer1".
OK
Return
NG
2.5 Computer 2
Command "A06"[CR] (Hex: 41 30 36 0d）
When COMPUER IN 2/MONOTOR OUT ternima is used as COMPUTER IN 2,Change
Details
the input to "Computer 2".
OK
Return
NG
[ACK]［CR］
"？" [CR]
[ACK]［CR］
"？" [CR]
[ACK]［CR］
"？" [CR]
[ACK]［CR］
"？" [CR]
[ACK]［CR］
"？" [CR]
Appendix
61
Advertisement
Table of Contents
