Editing; Editing With Another Video Recorder Or A Camcorder; System Connections; Connecting To A Satellite Receiver - JVC HR-J690EU Instructions Manual

Editing

Editing with another video recorder or a
camcorder
You can use your recorder as the source player or the recording
deck. You can use a camcorder as the source player and your
recorder as the recording deck. Refer also to the other
components' instruction manuals for connection and its
operations.
A
Make connections
Connection with another video recorder
A When using your recorder as the source player ...
... connect its L-1 IN/OUT connector to the recording deck.
B When using your recorder as the recording deck ...
... connect its L-1 IN/OUT or L-2 IN/DECODER connector to the
source player.
Connection with a camcorder
Connect the camcorder's AUDIO/VIDEO OUT connectors to the
recorder's L-1 IN/OUT or L-2 IN/DECODER connector via a cable
adapter.
B
Load cassettes
Insert the playback cassette into the source player and the cassette
to be recorded on into the recording deck.
C
Select input mode on recording deck
Select the correct external input on the recording deck. On this
recorder, press AUX and/or PR+/–.
Select "L-1" for the L-1 IN/OUT connector, or "L-2" for the L-2 IN/
DECODER connector.
D
Select edit mode
Select the appropriate edit mode for the components if such a
mode is equipped.
On this recorder, set "PICTURE CONTROL" to "EDIT". (
E
Start playback
Engage the Play mode of the source player.
F
Start recording
Engage the Record mode of the recording deck.

System Connections

NOTE:
When you select a country in Central or Eastern Europe for
country setting, you cannot use decoder with this recorder.

Connecting to a satellite receiver

Connect the decoder to the satellite receiver's connector if you
have a decoder, L-1 IN/OUT connector to TV's connector, and L-2
IN/DECODER connector to the satellite receiver's connector. Then
connect the satellite receiver and TV.
Set "L-2 SELECT" to "A/V". (
To record a programme via the satellite receiver, set the input
mode to "L-2" by pressing AUX and/or PR+/–.
To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
For details, refer to the instruction manual for the satellite
receiver and decoder.

Connecting/Using a decoder

You can enjoy the variety of programming that is available through
scrambled channels.
A Set "L-2 SELECT" to "DECODER". (
B Connect the recorder's L-2 IN/DECODER connector to the
decoder's 21-pin SCART connector using a 21-pin SCART cable.
C Perform the procedure as described in "When receiving a
scrambled broadcast" (

Connecting/Using a stereo system

You can listen to the soundtrack through your stereo system.
Connect the AUDIO OUT L and R connectors on the recorder to
the AUX IN or TAPE MONITOR connectors on your stereo
system's receiver or amplifier.
When listening to sound through the connected stereo system,
12)
turn the TV's volume down completely.
— 11 —
13)
13)
14).