JVC HR-J694EU Instructions Manual

Jvc hr-j694eu: instruction manual
Hide thumbs Also See for HR-J694EU:

Advertisement

Quick Links

LPT0625-001A
COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD.
Dear Customer,
Thank you for purchasing the JVC VHS video cassette recorder.
Before use, please read the safety information and precautions to
ensure safe use of your new VCR.
CAUTIONS
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION:
This video cassette recorder should be used with AC 120V
60Hz only.
To prevent electric shocks and fire hazards, DO NOT use any
other power source.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU
FOND.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
CAUTION:
Changes or modifications not approved by JVC could void
user's authority to operate the equipment.
VIDEO CASSETTE RECORDER
HR-J694U
,
d
INSTRUCTIONS
Declaration of Conformity
Model Number:
HR-J694U
Trade Name:
JVC
Responsible Party:
JVC Americas Corp.
Address:
1700 Valley Road Wayne, N.J. 07470
Telephone Number: 973-317-5000
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Failure to heed the following precautions may result in damage
to the VCR, Remote or video cassette.
1. DO NOT place the VCR ...
... in an environment prone to extreme temperatures or
humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are
generated.
... on a surface that is unstable or subject to vibration.
2. DO NOT block the VCR's ventilation openings.
3. DO NOT place heavy objects on the VCR or on the Remote.
4. DO NOT place anything which might spill on the top of the
VCR or on the Remote.
5. AVOID violent shocks to the VCR during transport.
For Customer Use:
Enter below the Model No. and Serial No. which are located
on the rear of cabinet. Retain this information for future
reference.
Model No.
Serial No.
● Cassettes marked "VHS" (or "S-VHS") can be used with this
video cassette recorder. However, S-VHS recording is not
possible with this model.
● This model is equipped with SQPB (S-VHS QUASI PLAYBACK)
that makes it possible to play back S-VHS recordings with
regular VHS resolution.
● HQ VHS is compatible with existing VHS equipment.
● As an E
®
S
Partner, JVC has determined that this
NERGY
TAR
product or product model meets the E
for energy efficiency.
Printed in China
1101 MNVfPJfBJ
®
S
guidelines
NERGY
TAR

Advertisement

Table of Contents
loading

Summary of Contents for JVC HR-J694EU

  • Page 1 LPT0625-001A COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD. Dear Customer, Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions to ensure safe use of your new VCR. CAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 2: Important Product Safety Instructions

    IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.
  • Page 3 TV screen or change the screen to a blue back display. ON PLACING THE VCR: Some TVs or other appliances generate strong magnetic fields. Do not place this appliance on top of the VCR as it may cause picture disturbance.
  • Page 4: Buttons, Connectors And Indicators

    Buttons, Connectors and Indicators Front Panel VIDEO/AUDIO input connectors Display panel Play indicator Record indicator Rear Panel AC power cord Cassette loading slot Infrared beam receiving window Timer mode indicator Channel and auxiliary input/Clock timer VCR mode indicator...
  • Page 5: Connections And Plug&Play Setting

    On-screen display If you press OSD on the Remote when “SUPERIMPOSE” is set to “ON”, you can see the current VCR status on the TV screen. Press OSD again to exit on-screen display. The indications are not recorded even if the VCR is in the recording mode.
  • Page 6: Initial Settings

    Final preparation for use Turn on the TV. Select the VCR channel 3 or 4 (or AV mode) on the TV. You can now perform basic playback or basic recording. ● If you connect the TV and the VCR only using the RF connection, press TV/VCR on the Remote so that the VCR mode indicator lights on the display panel.
  • Page 7: Tuner Setting

    (back to the beginning) Complete Semiauto Clock Set Press MENU to return to normal screen. Turn off the VCR. “Aut” will appear on the display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.
  • Page 8: Basic Playback

    VCR. ● Do not apply too much pressure when inserting. ● The VCR turns on, and the counter on the on-screen display is reset, automatically. ● If the cassette’s record safety tab has been removed, playback begins automatically.
  • Page 9: Basic Recording

    If the tape reaches its end during recording, the recording stops and “ EJECT ( 0 ) on the VCR to eject the tape or press REW ( 3 ) to rewind the tape. ). Or on the Remote, while holding REC ) to resume recording.
  • Page 10: Recording Features

    ” and “ $” on the front display panel blink. Press TIMER to disengage timer, then press STOP/EJECT ( 0 ) on the VCR to eject the tape or press REW ( 3 ) to rewind the tape. PROGRAM 1...
  • Page 11: To Use The Vcr While It Is In Timer Recording Standby Mode

    – Timer Recording – To use the VCR while it is in timer recording standby mode Press TIMER, then press POWER. After you use the VCR, press TIMER again to put the VCR into timer recording standby mode. Checking, canceling or changing...
  • Page 12: Other Functions

    (on-screen display) appears on the screen. NOTE: When you use this VCR as the playback VCR for editing a tape, be sure to set this function to “OFF”; otherwise, the VCR status information (on-screen display) will be recorded on the edited –WARNING–...
  • Page 13 Editing You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations.
  • Page 14: Specifications

    Specifications GENERAL Power requirement : AC 120 V Power consumption Power on : 13 W Power off : 1.5 W Temperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to 140°F) Operating position : Horizontal only Dimensions (W x H x D) : 435 mm x 94 mm x 247 mm (17-1/4"...
  • Page 15: For Servicing (Only In U.s.a.)

    Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level performance for which JVC is world famous. The JVC service and engineering organization stands behind our products.
  • Page 16: Warranty (Only In U.s.a.)

    WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period.

This manual is also suitable for:

Hr-j694u

Table of Contents