Remote Control; Basic Connections - JVC HR-J690EU Instructions Manual

Remote control

Number keys
Rewind3
Record7
Stop8
* PDC recording is not possible in Central and Eastern Europe.
On-screen display
If you press OK/ on the remote control when "O.S.D." is set to
"ON" ( 12), you can see the current recorder status on the
screen. To clear the on-screen display, press OK/
The indications are not recorded even if the recorder is in the
recording mode.
A Recorder operation mode
B Tape speed
C Tape direction
D Time counter
E Tape remaining time
F Audio mode
G Tape position*
* The position of " " in relation to "0" (Beginning) or "+" (End) shows
q
the current position on the tape.
H VPS/PDC* indicator
* PDC recording is not possible in Central and Eastern Europe.
I Type of broadcast
J Current day/month/year
K Clock
L Channel and auxiliary input
M Cassette loaded mark

Basic Connections

A
Check contents
Make sure the package contains all of the accessories listed in
"Specifications" (
B
Situate recorder
Place the recorder on a stable, horizontal surface.
C
Connect recorder to TV
Timer#
Aerial connector
Play4
Fast
Forward
5
Pause 9
again.
Back of recorder
RF Connection
A Disconnect the TV aerial cable from the TV.
B Connect the TV aerial cable to the ANT. IN connector on the
rear of the recorder.
C Connect the provided RF cable between the RF OUT
connector on the rear of the recorder and the TV's aerial
connector.
AV Connection
If your TV is equipped with a 21-pin SCART connector, perform
AV connection to improve picture quality during tape playback.
A Connect the aerial, recorder and TV as shown in the
illustration.
B Connect an optional 21-pin SCART cable between the L-1 IN/
OUT connector on the rear of the recorder and the TV's 21-pin
SCART connector.
D
Connect recorder to mains
Plug the mains power cord into a mains outlet.
— 3 —
16).
Back of TV
21-pin SCART
connector
21-pin SCART cable
(not provided)
Mains power cord
Mains outlet
TV aerial cable
RF cable
(provided)
ANT. IN
L-1 IN/OUT RF OUT