Toshiba 5520 Management Manual page 81

2.SETTING ITEMS (ADMIN)
Setting the copy calibration
1
Press [COPY].
2
Press [DEFAULT] to set the default calibration setting, or [CALIBRATION] to adjust the
calibration setting.
When you press [DEFAULT], the system maintains the default calibration setting and returns to the previous
screen.
When you press [CALIBRATION], a chart is printed out and the calibration guide illustration is displayed on the
touch panel.
3
Place the printed chart face down on the glass with the bottom toward you and the top
left aligned against the original scale on the left side, so that two black rectangular
marks are placed on the left side.
4
Press the [START] button on the control panel.
When the calibration setting is completed, the GENERAL menu will be displayed.
If the chart is not properly placed, the message "Set chart correctly" is displayed on the touch panel. In this
case, return to step 3 and realign the chart.
2 SETTING ITEMS (ADMIN)
Setting General Functions 79