Table of Contents
Advertisement
2 SETTING ITEMS (ADMIN)
Setting PEAP
The CA certificate must be installed in this equipment before performing settings for IEEE 802.1X authentication. For
instructions on how to install the certificate, refer to the TopAccess Guide.
1
Select [PEAP] and press [Next].
The WIRED 802.1X SETTINGS (PEAP) screen is displayed.
2
Select [EAP-MSCHAPv2] for the inner authentication method and press [Next].
The WIRED 802.1X SETTINGS (EAP-MSCHAPv2) screen is displayed.
136
IEEE 802.1X Authentication Setting
Advertisement
Table of Contents
