Canon imageRUNNER 2545i Easy Operation Manual page 7

>> Basic Copying Functions
Copying on Both Sides of the Paper
You can copy two-sided originals or multiple one-sided originals on
1 > 2-Sided
both sides of the paper.
† The 2 > 2-Sided and 2 > 1-Sided mode are available only when the machine is equipped
with the feeder (optional for the imageRUNNER 2545/2535/2530/2525/2520).
2 > 2-Sided
Book > 2-Sided (Left/Right 2-Sided)
1
† For The Book > 2-Sided mode, you will be asked to select the type of original.
Stapling Collated Copies
You can set the machine to staple the collated copies on the specified position.
† The Staple mode is available only when the optional Inner Finisher-B1 is attached to the machine.
2 Press [Finishing] → [Staple] → [Next] → select the staple type and position →
Stapled
press [OK] as indicated on the touch panel display.
11 Easy Operation Guide Copy
2 1
Chapter 2❖Copying Guide
2 > 1-Sided
Book > 2-Sided (Front/Back 2-Sided)
Press [2-Sided] → select the 2-Sided mode you want to
use → press [OK] as indicated on the touch panel
display.
Chapter 2❖Copying Guide
Making Copies in Sets Arranged in Page Order
You can set the machine to output the copies in sets arranged in
page order.
2
Making Copies Grouped by Page
You can set the machine to output the copies in groups of individual
pages.
2
1 2 3 4
1 2 3 4
1 2 4
3
Output Orientations
When performing Collate or Group copying, you can select either "Rotate" or "Offset" as the output orientation.
It is possible to combine the output orientation and the Collate or Group modes, such as Collate + Rotate, Group +
Offset, etc.
Rotate
Each printout group is output in alternating orientations.
(Not available when the optional Inner Finisher-B1 is attached
to the machine.)
Press [Rotate] → [Next] →
select the paper source
→ press [OK] to use the
Rotate mode.
Chapter 2❖Copying Guide
Press [Finishing] → [Collate] → [OK] as indicated on
the touch panel display.
Chapter 2❖Copying Guide
Press [Finishing] → [Group] → [OK] as indicated on the
touch panel display.
Offset
Each printout group is output with the same orientation, but
staggered and alternating layers. (Available when the optional
Inner Finisher-B1 is attached to the machine.)
Press [Offset] → [OK] to
use the Offset mode.
Basic Copying Functions Easy Operation Guide 12