Maintenance - Brother GT-541 Basic Operation Manual

5. Maintenance

5. Maintenance
To keep your printer work properly and maintain the fine print result, appropriate maintenance is
required.
Wait at least 5 minutes after turning off the power switch and disconnecting the power cord
from the wall outlet before opening the cover of the control unit. Touching areas where high
voltages are present can result in severe injury.
Do not put your hands in the ink cartridge slot, otherwise the needle inside the slot may
cause injury.
Wait at least 1 minute after turning off the power switch before opening the front cover.
Touching the heat sink on the head can result in burns.
Be careful not to get your fingers caught when closing the front cover, otherwise it may
result in injury to your fingers.
Do not disassemble the ink cartridge or the waste ink cartridge.
If the ink cartridge or waste ink cartridge is disassembled, it can no longer be used.
Take care not to let the ink, waste liquid or wash liquid come into contact with your eyes or
onto your skin, otherwise inflammation can result.
Furthermore, do not drink the ink, waste liquid or wash liquid under any circumstances, as
they can cause vomiting and diarrhoea.
Keep the ink, waste liquid and wash liquid out of the reach of children.
Use only the proper replacement parts as specified by Brother.
36
DANGER
WARNING
CAUTION
GT-541