Brother GT-541 Basic Operation Manual page 4

Setting up and moving of the printer should only be
carried out by a qualified technician.
The printer machine weighs approximately 100 kg.
Transporting and setting up of the printer should be
carried out by four or more people.
Furthermore, do not hold the printer by the ink
cartridge housing when transporting it, otherwise
the ink cartridge housing may become damaged
and the printer may fall down and cause personal
injury or damage to the printer.
Do not place the printer on unstable surfaces such
as unsteady tables or high shelves, otherwise it
may tip over or fall down and cause injury.
Furthermore, the table that supports the printer
should be at least 100 cm in width and 80 cm in
depth, and should be able to bear a weight of 150
kg or more.
This printer should only be used by operators who
have received the necessary training in safe use
beforehand.
Leave sufficient space at the front of the printer,
and avoid placing items in front of it, otherwise the
platen may hit them and be damaged, and if your
hands get caught between the platen and the
object, injury may result.
Release your hand from the platen while the printer
is operating. If your hand gets caught between the
platen or the T-shirt tray and the covers, injury may
result.
Wait at least 1 minute after turning off the power
switch before opening the front cover.
Touching the heat sink on the head can result in
burns.
Be careful not to get your fingers caught when
closing the front cover, otherwise it may result in
injury to your fingers.
Do not disassemble the ink cartridge or the waste
ink cartridge.
If the ink cartridge or waste ink cartridge is
disassembled, it can no longer be used.
CAUTION
Installation
Do not set up the printer in a place where it will be
affected
otherwise it may become unbalanced and fall down
and cause injury or damage to the printer.
Do not connect the power cord until setup is
complete, otherwise the printer may operate if the
power switch is turned on by mistake, which could
result in injury.
Do not climb onto the printer or place heavy objects
on top of it, otherwise it may become unbalanced
and tip over or fall down and cause injury.
Printing
Do not put your hands inside the covers while the
printer's power is turned on, otherwise your hands
may touch against moving parts and this may result
in injury.
If a problem occurs with the operation of the printer,
contact the place of purchase or a qualified
technician.
Maintenance
Take care not to let the ink, waste liquid or wash
liquid come into contact with your eyes or onto your
skin, otherwise inflammation can result.
Furthermore, do not drink the ink, waste liquid or
wash liquid under any circumstances, as they can
cause vomiting and diarrhoea.
Keep the ink, waste liquid and wash liquid out of the
reach of children.
Use only the proper replacement parts as specified
by Brother.
GT-541
by vibration from other equipment,
iii