Brother GT-541 Basic Operation Manual page 42

(1) Create a print data using a graphic application (Adobe Photoshop, CorelDRAW, etc.):
Design a print image using an operationally approved application. See "1-3-3. Software
Information".
(2) Set the print condition in the application:
See "4-2. Setting the Applications' Print Condition" in the Instruction Manual and set the print
condition properly.
(3) Set the printer driver condition:
See "4-3. Setting the Printer Driver Condition" in the Instruction Manual.
(4) Turn on your printer:
See "3-2. Turning On/Off Your Printer".
(5) Send a print data from the application to your printer:
When the printing command is executed from the applications, the print data is sent to your printer.
(6) Install the Platen of the size you have selected at the step (2):
See "4-4. Uninstalling / Installing the Platen" in the Instruction Manual.
<Note> Only the Platen 14 x 16 is included. Platen 10 x 12 is option.
(7) Place the T-shirt on the Platen and adjust the Platen height:
See "4-5.Placing the T-shirt on the Platen" in the Instruction Manual.
(8) Start printing:
Press the Print Button on the Control Panel to start printing.
(9) Remove the T-shirt from the Platen.
See "4-7. Removing the T-shirt from the Platen" in the Instruction Manual.
(10) Set the ink onto the T-shirt:
Use the Heat Press to set the ink onto the T-shirt. See "4-8. Setting the Ink onto the T-shirt" in the
Instruction Manual.
(11) Turn off your printer.
See "3-2-2. Turning Off Your Printer".
GT-541
4. Basic Printing Procedure
35