Replacing The Platen Sheet - Brother GT-541 Basic Operation Manual

5-1-4. Replacing the Platen Sheet

The Platen Sheet gets soiled as you repeat printing. If it happens, please replace the Platen Sheet to
avoid making smudge on a T-shirt.
(1) Press the Platen Button to eject the Platen.
(2) Remove the Platen Sheet and the adhesive tape from the Platen.
(3) Clean the surface of the Platen using a soft cloth damped with mild detergent, and then wipe it
using a soft and dry cloth.
(4) Make sure the surface of Platen is completely dry, and then put the new Platen Sheet on the
Platen. It is easier you peel off the release-coated paper little by little as you put the new Platen
Sheet.
<Note>
Put the Platen Sheet straight against the Platen without making creases.
(5) Press the Platen Button to install the Platen.
GT-541
5. Maintenance
45