Table of Contents
Advertisement
Warning!!!
The download firmware procedure cannot be interrupted. If the power and/or network
connection is broken during the download procedure, it might possibly cause serious
damage to the Internet Camera.
Please be aware that you should not turn off the power during updating the firmware and
wait for the finish message.
Furthermore, do not try to upgrade new firmware if it's not necessary.
Backup
Upload Setting
Add Language
Step 2. Make sure that only you access this device at this moment.
Step 3. Disable Motion Detection function.
Step 4. Select "Firmware name".
Step 5. Select the Firmware binary file.
Step 6. Once the firmware file is selected, select "Upgrade".
Step 7. The upgrade progress information will be displayed on the
screen.
Step 8. A message will be shown while the firmware is upgraded.
Once the upgrading process is completed, the Internet
Camera will reboot the system automatically.
Please wait for upgrade procedure to finish, and then you can use
PLANET IPInstaller to search the Internet Camera again.
Save all parameters and user-defined scripts to backup file:
To take a backup of all of the parameters, click this button. If
necessary, it will then be possible to return to the previous settings, if
settings are changed and there is unexpected behavior.
Specify the backup file to use:
Click the "Browse" button to locate the saved backup file and then click
the "Restore Setting" button. The settings will be restored to the
previous configuration.
Choose language:
The Internet Camera can provide multiple languages to meet
customer's requirement.
Select language file to upload:
User can manually update other languages into IP camera through
language file upload.
61
2 Mega-Pixel Wireless Fish-Eye IP Camera
ICA-HM830W
Advertisement
Table of Contents
