Continental Girbau CG50-60 Installation Manual page 36

4. Steam Damper Air System Connections
Steam models are manufactured with a pneumatic (piston) damper system, which requires an external
supply of compressed air. The air connection is made to the steam damper solenoid valve, which is located
at the rear inner top area of the dryer just in front of the electric service relay box.
a. Air Requirements
There is no air requirement for dryers with the Electromechanical Steam Damper Option.
Compressed Air Supply
Normal
Minimum Supply
Maximum Supply
Shaded areas are stated in metric equivalents
b. Air Connection
Air connection to system --- 1/8" N.P.T.
Air Pressure
80 PSI
70 PSI
90 PSI
32
5.51 bar
4.82 bar
6.20 bar