Foscam FI8918W User Manual page 11

Default parameter is 4, you can adjust the contrast of the image by clicking plus or minus button.
Preset/Go
1) Preset----------Support 8 preset position, which is considered enough for DIY home & small
business surveillance market
2) Set----------- Click Set to save the position you need the camera to remember
3) Go----------- Click Go to make the camera move the preset position
4) Number button from 1 to 8--------You can click the number button with preset position, and the
camera will go to the preset position.
How to do preset position?
We can start preset settings from position 1.
Firstly, select no. 1 within the menu of Preset on the panel.
Secondly, move the camera and stop at a place where you want make preset position.
Thirdly, click set button to save it as position 1 and you have done preset of position 1.
After that, you can select no. 2 within the menu of Preset on the panel, and move the camera and
stop at another place, and set as preset position 2. You can do all the 8 preset positions with this
method.
If you want to see the preset position you have set, such as the position 1, only select the set
no.1 ,and click go button, the camera will go to position no.1.
Flip & Mirror
You can flip the image by enabling Flip button, or mirror the image by enabling Mirror button.
Section4 Pan/Tilt Control
1------Up control button,
3------Left control button,
5----- Up-Left control button
7----- Down-Left control button
9------Go to center
Shenzhen Foscam Intelligent
Shenzhen Foscam Intelligent
Tel: 86 755 2674 5668 Fax:
Tel: 86 755 2674 5668 Fax:
1
5
3
7
2
8----- Down-Right control button
Technology Co., Limited
Technology Co., Limited
86 755 2674 5168
86 755 2674 5168
6
9
4
8
2------Down control button,
4------Right control button,
6----- Up-Right control button
w ww.foscam.co m
w ww.foscam.co m
8