Advertisement
User guide
※ Making sterilizing water (ion-lax)
1. Fill the tap water (or filtered water, underground water) in the spray container or storage container up to the marked line,
and then place it on the main body. (At this time, fit the arrow on the container to the arrow on the main body.)
2. Put one to two measuring spoons (1-3g) of the designated catalysis or the catalysis used at home
(possible to use refined salt, but impossible to use burned salt and flavored salt).
3. Check the
indicator on the main body, and press the
stand-by mode
stand-by mode
4. With "beep" sound, the water is automatically electrolyzed for about 1-2 minutes, and then sterilizing water is created.
(The operation indicator and the floodlight are on, and a lot of white bubbles rise.)
5. When the sterilizing water is created, it generates the completion signal of "beep-beep" sound twice at 30 second intervals.
※ Making washing water (detergent)
1. Fill the tap water (or filtered water, underground water) in the spray container or storage container up to the marked line,
and then place it on the main body. (At this time, fit the arrow on the container to the arrow on the main body.)
2. Put one to two measuring spoons (1-3g) of the catalysis (potassium carbonate) provided by the manufacturer.
3. Check the
indicator on the main body, and press the
stand-by mode
stand-by mode
4. With "beep" sound, the water is automatically electrolyzed for about 1-2 minutes, and then sterilizing water is created.
5. When the sterilizing water is created, it generates the completion signal of "beep-beep" sound twice at 30 second intervals.
※ Advisable amount of catalysis with the measuring spoon depending on the container:
spray container (600mL): about one to two spoons (1-2g)
large storage container (1,200mL): about one to three spoons (1-3g)
The range of nature-friendly function water that can be used safely
button.
button.
Advertisement
