Magnifying Images - Canon PowerShot S30 User Manual

Magnifying Images

In single image replay, the displayed image can be shown magnified by an
approximate factor of 2.5 or 5 for PowerShot S30 and 3 or 6 for PowerShot S40.
1
Slide the power/replay lever to the right.
2
Slide the zoom lever toward
Magnified
approximately 3 times
(PowerShot S40)
• The display cycles to the next magnification mode each time you slide the
zoom lever toward
• You can move around the magnified image using B, A, C or D on the
multicontroller. ller. ller.
Reducing the size of the enlarged image until it displays in its original size ize of the enl ize o ize of the en ize o
1
Slide the zoom lever toward zoom le zoom le
• The most magnified image is reduced to 2.5 times the original size for
PowerShot S30 and 3 times the original size for PowerShot S40 by sliding
the zoom lever toward
the image to its original size.
• Movie frames and index replayed images cannot be magnified.
• If the camera is protected by Digital Camera Waterproof Case WP-DC300, you
cannot move the magnified area using C or D on the multicontroller.
• You can magnify an image while it is displayed on the LCD monitor in Shooting
mode immediately after the image is shot (p. 46).
Approximate
position
.
roun the magnified he magnified e magnifie
larged ima larged imag larged ima larged imag rged im rged ima
. Sliding the zoom lever toward
.
Magnified
approximately 6 times
(PowerShot S40) ot S4 ot S40
ication mode ication mode ation mo each tim each tim ach ti
A A,
image usin image usin age u
unt unt
.
Approximate
es es
position
again reduces
93
Replaying