Pressure Relief Procedure - Titan IMPACT 1140 Owner's Manual

Timers Screen
The Timers screen shows the total time
the sprayer has been turned on as well
as the total time the sprayer has been running (pumping).
To select the Timers screen, press the
#4 key.
job Timers Screen
The Job Timers screen allows the user
to reset the "ON TIME" and "RUN TIME"
to track time on specific jobs.
To select the Job TImers screen, press
the #4 key. "JOB ON" screen will
appear. Press #3 to reset. Press #1 to
continue to "JOB RUN" screen. Press
#3 to reset. Press #1 to scroll through
the remaining menu screens.
Service Time Screen
The Service Time screen allows the user
to set a service time interval (in hours).
Below the set time, the screens shows the current amount of
hours on the sprayer since the last activation of the service timer.
To select the Service Timer screen, press the #4 key.
To set the service time, press the #2
(up) and/or the #3 (down) keys to the
desired time (run hours will increase/decrease in increments of 1
for each time you press a key).
When the service time interval is set and met by the run hours,
the display will show a "Service Required" screen. The pump
will remain functional. To return to the Main Screen, press the
#1 key. Doing so will reset the "Service @" and "Run Hours"
displayed on the Service Screen back to 0.
Security code Screen
The Security Code screen allows the
user to set a four digit security code
to prevent unauthorized use of the sprayer. If a security code
has been set, the control system display will ask for the code at
startup. If the correct code is entered, the display will show the
Main Screen and the sprayer will operate. If the wrong code is
entered, the display will continue to ask for the correct code and
the sprayer will be disabled. To set or change the security code,
press the #2 key.
NOTE: If the sprayer is new, no security code is set and
the Main Screen will appear at startup. When
setting a security code for the first time, the
"Enter Old code Number" screen will appear,
and you will need to enter "1111".
Enter the old security code number to
access the screen that allows the code
change. If the wrong code is entered, the display will continue
to ask for the correct code and the security code cannot be
changed.
Enter the new security code. Once the
new code is entered, the display will
automatically ask that the new code be
re-entered for verification. If the same
new code is re-entered, the display will
confirm that the new code has been
accepted and return to the Main Screen.
If the new code is re-entered incorrectly, the display will return
to the "Enter New Code Number" screen and the process will
repeat.
If you forget or misplace your security code, you can call Titan
customer service for assistance.
© Titan Tool Inc. All rights reserved.
TIMERS
MENU-1 SELECT-4
ON TIME XXXX
RUN TIME XXXX
Prime Screen
The Prime screen appears when the
JOB TIMERS
pressure control knob is set at the "MIN"
MENU-1 SELECT-4
setting.
JOB ON X
Rapid clean Screen
MENU-1 RESET-3
JOB RUN X
The Rapid Clean screen appears when
MENU-1 RESET-3
the pressure control knob is set at the
RAPID CLEAN position and the PRIME/SPRAY valve is in the
PRIME position.
SERVICE TIME
MENU-1 SELECT-4

Pressure Relief Procedure

SERVICE @ XX
RUN HOURS XX
SECURITY CODE
MENU-1 CHANGE-2
ENTER OLD CODE
NUMBER XXXX
ENTER NEW CODE
NUMBER XXXX
RE-ENTER NEW
NUMBER XXXX
NEW CODE NUMBER
ACCEPTED
7
NOTE: To inactivate the anti-Theft Digital Lockout
security function, enter "1111" at the "Enter New
code Number" screen (this is the default code
that leaves the sprayer unlocked). as a result,
the Main Screen will appear at sprayer startup.
NOTE: If there is no action at any menu screen for 30
seconds, the display will go back to the Main
Screen.
Be sure to follow the pressure relief procedure
when shutting the unit down for any purpose,
including servicing or adjusting any part of the
spray system, changing or cleaning spray tips, or
preparing for cleanup.
1. Lock the gun by turning the gun trigger
lock to the locked position.
2. Turn off the sprayer by moving the ON/
OFF switch to the OFF position.
3. Turn the pressure control knob
counterclockwise to its OFF position in
the black zone.
4. Unlock the gun by turning the gun
trigger lock to the unlocked position.
5. Hold the metal part of the gun firmly to
the side of a metal container to ground
the gun and avoid a build up of static
electricity.
6. Trigger the gun to remove any
pressure that may still be in the hose.
7. Lock the gun by turning the gun trigger
lock to the locked position.
8. Move the PRIME/SPRAY valve down
to the PRIME position.
PRIME
RAPID CLEAN
Trigger lock in
locked position.
English