Table of Contents
Advertisement
HOW TO INSTALL WITH A CHILD HARNESS
INSTALLING CHILD HARNESS INTO SEAT
A. If the seat is fitted to the car, remove it as
it will be easier to fit the child's harness.
B. Prepare the child harness by lengthening the child
harness by pressing the adjuster button (1) and
pulling the shoulder strap (2).
Instructions for Installation & Use - Series No. 8100/A/2010
40
Left hand Strap
Cross Strap
Attachment Clip
Adjuster under
cover
2
1
HOW TO INSTALL WITH A CHILD HARNESS
C. Adjust headrest to the appropriate height (refer to
page 14) and lock in position. Feed the left hand
Harness Strap & Cross Strap through the right
hand shoulder slot then over the harness cross
bar.
D. Pull the left hand Harness Strap & Cross Strap
through the opposite shoulder slot. Make sure that
the Anchor Clip also feeds through to the back of the
restraint. Hook the Attachment Clip onto the Harness
VERSATETHER™ Catch and ensure that the straps line
up to an equal length. See next page.
Instructions for Installation & Use - Series No. 8100/A/2010
Feed left hand
Harness Strap &
Cross Strap through
right hand slot.
Child Harness over
the harness cross
bar.
Hook the Attachment Clip
onto VERSATETHER™
Catch.
Pull left hand
harness strap
through the
opposite slot
until the straps
are of equal
length.
41
Hide quick links:
Advertisement
Table of Contents
